Pumps

Flow rate: 700 m³ / h
Pressure: 550 m / 110 ° C

• Multistage pumps are used in applications where high headroom is required.
• The stages are connected in series and the output of one stage is installed as the input of the other stage
• The total head of the head is the sum of the head of each step.
• It is preferable to have too high a discharge head according to the flow rate.
• Balancing holes in impellers minimize axial loads and are dynamically balanced.
• The suction flange is on the coupling side and on the right side. The discharge flange is on the other side and upwards. (Unless requested otherwise)
• Soft seal is used as sealing element.
• Cylindrical roller bearing is used at both ends of the pump which is resistant to high temperatures and can be operated in severe conditions.
• It provides advantage in tolerability since there is no step in the shafts.